Example Pre-set Configurations
Education
Config 10 - Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channels 1, 2 and 3.

Config 10 - Classroom with 3 rows of luminaires working in absence mode. Whiteboard on channel 5.

Graduated dimming
The lighting within a space dims progressively from the source of natural illuminance in response to changes in natural light levels. This maximises the use of daylight within a space and minimises energy consumption and over lighting of the space.
Scene setting
Scene selection allows the recall of pre-programmed lighting levels to create different moods or to suit different uses within an environment.
Absence recovery
This initiates presence mode in absence applications after a detector timeout period has elapsed. The default for this is 10 seconds. There is also a fade time with a pre-set default of 5 minutes, this means that any dimmable luminaires will dim down to 20% to give a visual indication that the fade time period has started.
Switch detection time
This ensures that if a switch is activated to turn the lighting on and no occupancy is detected within 10 seconds of the switch being pressed, the lighting will turn off.
Default pre-set configurations for all education applications
A series of inbuilt pre-set configurations designed specifically for the education sector ensure that the lighting control is flexible and intuitive and does not impinge on the teaching environment. It also allows for education spaces to be easily reconfigured with minimal disruption.
Commercial / Retail
Config 1-4 - Cellular offices individually controlled with a presence detector and or manual switch in each.

Config 3 - Open plan office working in presence mode with channels 5, 6 and 7 daylight dimming for perimeter row(s).

Corridor hold
For safety reasons, lights are kept on for entry exit routes, even when an adjacent area is unoccupied.
Scene setting
Scene selection allows the recall of pre-programmed lighting levels to create different moods or to suit different uses within an environment.
Master on switch
This switch turns on all the luminaires connected to an LCM regardless of channel or input arrangement.
Open port function
No need to access the LCM to set the pre-set configuration.
Modular mechanics
Luminaire leads, presence detectors and scene plates simply plug into the LCM making Vitesse Plus simple and easy to install without complicated wiring.