ELTD1 DIN rail, automatic emergency lighting test switch, single channel
This automatic DIN rail mounting emergency lighting test switch is permanently wired to the emergency fitting supply.
The automatic control is used to interrupt the supply for a pre-programmed period. At the end of the time period, the supply to the luminaires is automatically reinstated. The result is that there is no risk of depleting the batteries in the emergency fitting by leaving them connected for prolonged periods.
This single DIN rail module device can be conveniently located at the distribution board or in a control panel.
Test Periods: 10 minutes, 30 minutes, 1 hour, 3 hours
Please note: A single ELTD1 is suitable for switching one circuit. For multiple circuit applications use ELT-REL.
Part codes:
CODE | DESCRIPTION | LOAD RATING AT 230VAC | ||
---|---|---|---|---|
F | CFL | LED | ||
ELTD1 | DIN rail, Automatic emergency lighting test switch, single channel | 6A | 3A | 3A |
Key:
F = Fluorescent Lighting, CFL = Compact Fluorescent Lighting, LED = LED Lighting
Energy Efficiency in Buildings
This product forms part of a wide range of devices to enable Energy Efficiency in Buildings – A structured and holistic approach to reducing the carbon footprint and increasing sustainability of businesses.